2011/12/16

龍年就到啦!hamanaka分享鉤圖

pdf 檔,要鉤圖就直接點張圖就可以dl pdf 啦!!^^






    

 


2011/8/20

bow




米色lace加上玻璃珍珠!
美也可以很簡約!


 


2011/8/17

停不了的癮



かぎ針あみスイーツのこもの (暮らし充実すてき術)


あみぐるみの森 (ハンドメイドシリーズ) [単行本(ソフトカバー


あみぐるみのちいさなストラップ (レディブティックシリーズ no. 3199)


羊毛フェルトで作る マトリョーシカマスコット [単行本]

006


縁起もののあみぐるみ (レディブティックシリーズno.3232) [ムック]




本本都好鐘意呀!即刻訂左!^^


 

2011/8/11

訂造窗簾

搬左新屋,都想自己車窗簾

但未整過,吾知點入手

所以就四出去報價

係香港問左訂3幅要1700-2200,

身邊個個朋友都講太貴了

有同事介紹係taopo買,但摸吾到布質....

上網搵資料之後就決定上去東門睇下

成日聽人講去東門訂造窗簾!

今日自己上去搵左

原來....訂造窗簾吾係街店

係一座商場 @@

個商場分好幾層...每層都有好多間細鋪

各式各樣的布都有,

好多布都係 十至幾百不等

而我搵到我原本係香港睇中一模一樣的布,

用800rmb就訂造了8幅!

3小時可拎貨

當日去整,亦都遇到好多香港買家

另掛鉤8毫一個

用係窗簾段面 最頂的掛鉤位的白布

亦買左d要用來自己車時窗簾時用一米3rmb


亦都可以只係買布

^^







 


2011/8/10

烘焙工具材料 @ 一遊


















第一次見到成層都係烘焙工具材料的地方

咩工具都有........


2011/7/27

係時候為你既燙衫版換個新套啦!!

轉載網絡分享


ironing slip cover


Supplies:


About 2 yards of fabric – measure the length of your ironing board and add 9 inches
2 yards of 3/8″ elastic
Thread
Sewing Supplies


First things first! If you want to be able to wash your cover in the future, you need to pre-shrink your fabric! Throw it in the wash and dry it according to the instructions on the bolt at the fabric store. Usually you wash cold and dry at med heat. After it’s dry iron out all the wrinkles. Then you’re ready to start!



Turn your not so gorgeous ironing board upside down on top of your fabric. Line one edge about 3 1/2 inches away from the edge of the fabric, this way you have a good size piece of scrap fabric left on the other side!


ironing slip cover


Using a ruler or measuring tape cut the fabric 3 1/8″ away from the board edge. It doesn’t have to be perfect.



Flip your ironing board back on it’s legs. Now you’re going to press under 1/8″ along the edges of the piece you just cut. You will sew this under for a nice clean finish.


ironing slip cover


Stitch right on top of the newly pressed seam, it really doesn’t have to be perfect, just make sure the stitching goes through both layers.



Next take the fabric back over to the ironing board. Using a ruler or measuring tape press under 5/8″ along all the edges. Here’s the problem you’re going to run into. On the rounded edges (the two bottom corners and top rounded edge) the fabric is going to be hard to press evenly. Just do the best you can and you should end up with some creases like this picture below. We’ll fix that next.


ironing board slip cover


Along the three rounded edges we are going to add a single row of gathering stitches. Here’s how. Sit down at your sewing machine, find the stitch length control. Change the stitch length to 4. Then just along the rounded edges stitch right on top of the other row of stitching you already have. Leave the thread tails long so you can easily gather them.



You already have the 5/8″ seam pressed down, so take a few pins {yuck, pins.. they are necessary for this} and pin the pressed edge down. It should pucker and NOT lay smoothly.



Next find the top thread of the gathering stitch you just added. Pull the long thread and bunch/gather the fabric to the middle of the curved edge. Like this:



Then smooth out the gathers until the fabric no longer puckers and lays smoothly against the top piece of fabric! Doesn’t that look so much better! Leave the pins in for the next step.



Sew on top of the clean finish seam you already have to create a casing for the elastic. Make sure you leave an opening to thread the elastic through. An inch should be plenty!



Hook a big safety pin onto the end of your elastic and start scrunching and pulling it through the casing. When you get back to where you started, hook the bobby pin onto the other end of the elastic. I ended up using exactly 2 yards for my ironing board. Slip your cover over your ironing board and cinch the elastic until the cover fits snugly. You may not need to cut anything off, but just make sure it fits right. When you have marked your elastic where it needs to be sew the two pieces of elastic together with a few rows of stitching. Then stitch the casing closed where you left the opening. OR if you are feeling lazy.. you can leave it open.


ironing board slip cover


AND… You’re done! Slip your new cover on right over your old one. This will add extra padding and unless your fabric is sheer you shouldn’t be able to see your old ugly cover through it. This cover is washable! If you ever have the need, throw it in the wash and it will look like new! Now admire your beautiful new ironing board! Here’s a shot from underneath.


ironing board slip cover


Whew, that looks so much better! I no longer have to be ashamed of leaving my ironing board sitting out for days. Trust me, it happens. Now all your friends and neighbors will be asking where you got that cute cover!


ironing slip cover


I get excited every time I pull it out! Off to the laundry room to start ironing in style!


ironing board slip cover


 


以上文字及圖均轉載自lara


2011/7/13

120cm既貓,有興趣鉤嗎?

マナちゃんあみぐるみ 大きなマナちゃんから小さなマナちゃんまで編みぐるみマナちゃん大集合!毎月1点、テキストを公開します♪


※画像をクリックすると編み図PDFがダウンロードできます。




1.手のりマナちゃん

AMU-43(テキスト公開中)


くたっとかわいい子猫のマナちゃんです。中はペレットが入っています。

できあがり寸法長さ12.5cm



マナちゃん(小)

AMU-44(テキスト公開中)



小さくてかわいいマナちゃんです。左は毛糸玉とセットです。右はおざぶとんに座っているマナちゃんです。ポーズ違いで作ってもいいですね。


できあがり寸法高さ16.5cm




3.マナちゃん(中/大)

AMU-66(テキスト公開中)



編み図は同じ。ボニーとジャンボニーで作ると、大きさが中と大に!


できあがり寸法(中)高さ30cm(大)高さ48cm




4.特大マナちゃん

AMU-69(テキスト公開中)

超大隻cat呀!!


hamanaka吾知分享到幾時


鐘意既朋友要快d 下載!^^


(想下載請點圖,佢就會自己連去鉤圖的pdf)